What does the 2027 GMC Sierra 1500 cost in El Paso, from Pro to Denali Ultimate?

The 2027 GMC Sierra 1500 runs across six trims, from the Pro at the bottom of the price range to the Denali Ultimate at the top, with Elevation, AT4, AT4X and Denali between them. Each trim has its own published MSRP, and Group 1 GMC Westside at 955 Crockett St in El Paso sells new GMC trucks.

The Pro is the lowest-priced trim, with a starting MSRP of $39,300 (GMC, 2027). Texas then adds sales tax, title and registration on top of that price.

Keep reading below, then schedule a test drive in El Paso. Bringing your own numbers to the lot settles this faster than any spec sheet.

What is the MSRP of each 2027 GMC Sierra 1500 trim in El Paso?

GMC lists the 2027 Pro at $39,300, the Denali at $70,900 and the Denali Ultimate at $85,100 (GMC, 2027). GMC lists the 2027 Elevation at $50,200, the AT4 at $70,700 and the AT4X at $82,700 (GMC, 2027).

These are starting prices. The truck you drive off with depends on its cab, drivetrain and options, which the next two sections cover. At Group 1 GMC Westside, we sell new Sierra 1500 trucks at 955 Crockett St in El Paso.

What does each 2027 GMC Sierra 1500 trim add over the Pro?

Extra-cost options on the Pro include a 5.3L V8 with a 10-speed automatic, the Graphite Edition and a 10-way power driver seat with power lumbar. The AT4 lists a 15-inch diagonal multicolor Head-Up Display and a 6.2L V8 with a 10-speed automatic as available features. GMC’s AT4 listing also names a 2-inch factory lift with off-road suspension and Rancho monotube shocks.

On the 2026 model, the Pro and the Elevation both carry up to 420 horsepower and seat up to six in the Crew Cab.

How do cab, drivetrain and freight change a 2027 Sierra 1500 price?

A 4WD Crew Cab Elevation lists at $59,995 with GMC’s $2,795 destination freight charge included (GMC News, 2026).

That is a 4WD Crew Cab price, so cab and drivetrain are already built into it. Freight is the part of the price that does not change with your choices. Towing also changes with cab and drivetrain, so check the tow figure for your build before you choose.

How much are Texas sales tax, title and registration on a new Sierra 1500?

For a new Sierra 1500, the Texas motor vehicle sales tax rate is 6.25%, applied to the sales price after any trade-in allowance is subtracted (Texas Comptroller of Public Accounts, 2026). The title fee is $33 for El Paso County, which the TxDMV title manual places in the $33 group (Texas Department of Motor Vehicles, title manual, 2026).

Registration starts with a $50.75 annual fee for a passenger vehicle or truck up to 6,000 pounds gross weight. El Paso County adds a local fee of $20 on top of that base fee (TxDMV fee chart, 2026).

How does a trade-in lower what you pay for a 2027 Sierra 1500?

A trade-in lowers the price the sales tax is figured on. The Texas Comptroller says the tax is figured on the sales price less any amount given for trade-in vehicles (Texas Comptroller of Public Accounts, Motor Vehicle Tax Guide, 2026).

After the inspection, we write you a check, and the amount can go toward a down payment.

How do you apply for Sierra 1500 financing at Group 1 GMC Westside?

Start with our secure online finance application. We offer that application online, so you can begin your financing before you visit 955 Crockett St. Bring the Sierra 1500 model and trim you are considering so the figures match the truck you choose.

FAQ

What should an out-the-door quote on a new Sierra 1500 itemize?

An out-the-door quote should list the trim’s starting MSRP, any destination freight, and the Texas motor vehicle tax, title and registration fees on separate lines. Texas taxes the total consideration for a retail sale unless an exemption applies, and the dealer must remit that tax within 30 calendar days of the sale (Texas Administrative Code, 2020). Compare every quote line by line rather than just the total.

What warranty comes with a new 2027 GMC Sierra 1500?

GMC’s published terms for the 2026 Sierra 1500 list a basic warranty of 3 years or 36,000 miles, whichever comes first. The powertrain warranty is typically 5 years or 60,000 miles, and the corrosion warranty is typically 3 years or 36,000 miles, with other durations available.

How much can a 2027 GMC Sierra 1500 tow, trim by trim?

Towing depends on engine, cab, bed and drivetrain, not on trim alone. GMC’s 2026 trailering charts rate a TurboMax Crew Cab short bed 2WD at up to 9,100 pounds and a Duramax 3.0L Turbo-Diesel 2WD in that same configuration at up to 13,100 pounds. A Duramax 3.0L Turbo-Diesel Double Cab standard bed 2WD reaches up to 13,300 pounds.

How do I compare Sierra 1500 prices between El Paso dealers?

Match the trim, cab, drivetrain and bed on each quote before you compare them. Then check each quote’s MSRP, freight, tax, title and registration on its own line. A low total can hide a higher freight charge or a fee you did not expect.

Where is Group 1 GMC Westside and when is it open?

You can find Group 1 GMC Westside at 955 Crockett St in El Paso, TX 79922. The sales department is open Monday to Saturday from 9:00 AM to 8:00 PM and closed on Sunday. Service and parts hours are Monday to Saturday 7:00 AM to 6:00 PM, closed Sunday, and sales can be reached at (915) 519-1116 while service is at (915) 317-5659.

Does Group 1 GMC Westside sell used Sierra 1500s as well as new?

We sell new GMC models and offer used and certified pre-owned GMC vehicles, and our used inventory spans several makes. GMC’s certified used program is CarBravo. A CarBravo certified used vehicle under 10 model years old and 100,000 miles carries 12-month/12,000-mile Bumper-to-Bumper Limited Warranty coverage, whichever comes first, with no deductible (CarBravo, 2026).

How do I book service for my Sierra 1500 in El Paso?

Our Certified Service experts and technicians do the service work at Group 1 GMC Westside. The parts center at Group 1 GMC Westside stocks GMC parts and orders any part it does not have.

Why buy a 2027 Sierra 1500 from Group 1 GMC Westside in El Paso?

Our Google rating is 4.5 stars across 3,010 reviews, and 82 in 100 of those reviews are five-star. In an April 2025 Google review, Jesus O. wrote: “Great experience with Ulises Olivas. Made a deal work in minutes. Clear on the pricing and very effective communication. Highly recommend him when you are looking for a new truck.”

We are part of Group 1 Automotive, and we sell new GMC Sierra 1500, Sierra HD, Canyon, Sierra EV, Hummer EV Pickup, Hummer EV SUV, Terrain, Acadia, Yukon, Yukon XL, Savana and Sierra Cab Chassis. Our finance center offers pre-owned car loans, new GMC financing and GMC leases, so you can compare how you pay on the same truck in one visit.

Start at Group 1 GMC Westside, 955 Crockett St, El Paso, by looking at the new Sierra 1500 lineup and bringing your trade, your trim and your list of questions.

Group 1 GMC Westside answers this question against the specific vehicle in front of you rather than the model in general. Value your trade and get pre-approved online, then see us at our El Paso showroom, or call (915) 519-1116.

Disclaimer: Vehicle features, specifications, pricing, options, and availability may vary based on production timelines and dealership inventory; images are for illustrative purposes only. Starting MSRP figures are national and exclude destination freight charges, tax, title, license, and dealer fees. Standard and available equipment varies by trim, configuration, and model year; confirm the specification of the individual vehicle before purchase. Maximum towing and payload ratings depend on cab, bed, drivetrain, and equipment configuration; see the vehicle’s Owner’s Manual and trailering guide for limits. Electric range and charging times vary with battery, configuration, temperature, terrain, load, and driving habits. Safety or driver assistance features are no substitute for the driver’s responsibility to operate the vehicle in a safe manner. Financing and pre-approval are subject to credit approval. Contact Group 1 GMC Westside for complete details regarding current vehicle inventory, pricing, and equipment.

Contact Us

We would love to hear from you! Please fill out this form and we will get in touch with you shortly.
  • This field is for validation purposes and should be left unchanged.